WisDom User Manual
9
Chapter 1: Introduction
Congratulations on your purchase of the WisDom - RISCO Group's
Wireless Security System. The WisDom has been specifically designed
to meet a wide range of security needs for many residential and small
commercial applications.
Your WisDom controls and monitors a variety of sensors, detectors,
and contacts placed throughout the premises, which provide perimeter
and interior intruder protection.
The WisDom is designed to recognize abnormal conditions and inform
the system of the status of any protected door, window, hallway, room,
or area. Status information is presented visually or verbally. It supports
the capabilities of communicating with a central monitoring station or to
your mobile phone using friendly and easy to understand verbal
messages as well as SMS or E-mail messages (via the AGM).
You can place a household appliance or premises lighting under the
control of the WisDom , where it can be conveniently turned on and off
automatically or by user command from the system keys, wireless key
fobs or remote phone.
The WisDom contains multiple programming features. Ask your
engineer, who should be responsible for the installation of the
WisDom, which features have been programmed for your system.
This manual describes how to operate your system. It will guide you
through programming instructions for main system features as well as
basic setting and unsetting commands for the system.
NOTE:
All the voice capabilities described in this manual are applicable only to
WisDom models that have integrated voice capabilities.
To Next Page
Loading...
