Risco Agility 4 - Testing Follow Me Reporting

Page 46
To define a Follow Me destination using the LCD/Panda keypad:
1. Press
/ and enter your Grand Master code to access the User Menu.
2. Use / to scroll to Follow Me, and then press / .
3. Scroll to select the user’s index number, and then press
/ .
4. Scroll to Define FM, and then press
/ ; “Enter Phone” displays.
5. Enter the phone number (including area code) or e-mail address:
 Use the scroll keys to go forward or backward, to edit each digit, as necessary.
 Place the curser at any digit/character you wish to delete, then press
/ and
simultaneously for 2 seconds (you can also over-write any digit/character).
NOTE: Up to 32 digits/characters can be used for a Follow Me destination (phone number,
e-mail address).
6. If required, incorporate the special functions listed below to achieve the described
effect. Press or / or to toggle to the required character.
Special Function Required character
Stop dialing and wait for a new dial tone W
Wait a fixed period before continuing to dial ,
Send the  character

Send the # character #
User for calling internationally
+
7. When done with your entry, press / . “FM data saved” displays.
Testing Follow Me Reporting
The Grand Master and installer can test Follow Me reporting.
To test Follow Me reporting:
1. Press / and enter your code to enter the User Menu.
2. Use / to scroll to Follow Me, and then press / .
3. Scroll to select the user’s index number, and then press / .
4. Scroll to Test FM and then press
/ ; “FM Test Activated” displays and a test
event will be sent to the Follow Me destination.