Page 36
Telephone Operations Menu
The Operations menu announces the options and instructions for operating the system by
telephone. The menu options vary, according to system status and user access rights.
Operation Procedure
Set all partitions Press [1][1]
Set a selected partition Press [1][9] followed by the partition number
Unset all partitions Press [2][2]
Unset a selected partition Press [2][9] followed by the partition number
Change Zone Omit status Press [3] followed by the zone number, then [#][9]
Operate Utility Outputs Press [4] followed by the output number
Change Follow Me numbers
Press [5] followed by the FM number and [#][2].
Enter the new phone number and press [#][1].
Listen in to the premises Press [6][1] See Talk & Listen below.
Talk to the premises Press [6][2] See Talk & Listen below.
Listen and Talk to the premises Press [6][3] See Talk & Listen below.
Record messages that are not
included in the message bank
(up to 5 messages possible)
Press [7][1 through 5]
Record an opening message Press [7][6]
Exit the System Press [0]
Return to the previous menu Press [*]
Repeat the menu options Press [#]
Talk & Listen
Talk & Listen enables 2-way communication (listening-in only, talking only, or both), and
is used, for example, to remotely and silently listen in to the premises to verify the cause of
an event occurrence, or to remotely talk to someone at the premises.
To use Talk & Listen:
1. From the Operations menu, press [6]; the following is announced: “To listen-in press
[1], to talk press [2], to listen-in and talk (open channel) press [3], to return to the
previous menu press [*].”
2. Select an option.
3. Press [*] to end the session and return to the Operations menu.
To Next Page
Loading...
