Page 11
Panda Keypad LED Indicators
LED Description
On: System connected to cloud
No: No cloud connectivity
Slow Flash: Cloud connectivity Fault
On: System ready
Off: Open zones
Slow Flash: Ready to set with open entry/exit zone
On: Zone/keypad/external module has been tampered
Off: Normal operation
On: Fully set
Slow flash: Exit delay
Rapid flash: Alarm
On: Partially Set
Off: No omitted zones
On: Fault in the system
Off: No Fault
Remote Control LED Indicators
Operation LED state (send command*) LED state (receive status)
Full Set Green Red
Part Set Green Orange
Unset Green Green
Alarm Green Flashing Red
*If the Send command (green) LED changes to orange, it indicates a low battery
condition.
Remote Control Buzzer Indicators
Sound Status
1 beep Confirmation
3 beeps Error
5 beeps Alarm
To Next Page
Loading...
