ritetemp 8030C - User Manual

Operation 8030C
Made in China
Customer Support: 888-515-2585 or Visit our webiste w ww.ritetemp-thermostats.com
401-011
RESET
MENU
PROGRAM
NOTE: Your thermostat comes from the factory calibrated to + or - 1
o
F actual
temperature. It is an accurate instrument. If you want your thermostat to display
the same temperature as another thermometer in your home, you can adjust its
calibration.
To change the calibration:
The unit must be in the HEAT or COOL mode.
Press the MENU button.
Press the Temp Up/Temp Down arrows to adjust the temperature reading.
CALIBRATE DISPLAY ON will appear.
Press HOME to save the new setting.
Calibration
RESET
MENU
PROGRAM
CALIBRATE DISPLAY
-T FACTOR

ritetemp 8030C Specifications

General

Type	Programmable Thermostat
Display	LCD
Programmable	Yes
Wi-Fi Capability	No
Hold Feature	Yes
Filter Change Alert	Yes
Backup Battery	Yes
Compatibility	Heat Pump

Summary

Calibration

How to Change Calibration

Steps to adjust the temperature reading on the thermostat.

Using a Touch Screen

Touch Screen Operation

Guidance on selecting functions by tapping the screen.

MENU Screen

Set Day, Time, and °C;°F

Adjusting the day, time, and temperature display format.

PROGRAM Screen

Set Program Day and Time Slot

Set Program Time and Temperatures

Configure Thermostat

Set Day of the Week

Set Time of Day

Auto-Run Program

Energy-Star Program

Using the EPA recommended Energy-Star auto-run program.

Program Thermostat

Select Day and Time Slot

Select Time of Day

Select Desired Temperature

Manual Override

Temporary Override

Set a temporary target temperature for the system.

Hold Temperature

Set a permanent hold temperature until deselected.

Special Features

Lock Settings

Low Battery Warning

Indicates when batteries need replacement.