ritetemp 8050C User Manual

HEA
T
C
OO
L
A
U
TO
ON
OFF
FAN
Operation 8050C
Customer Support: 888-515-2585
or
Visit our website www.ritetemp-thermostats.com
1-405-062
PG 12
Heat Pump EMER button
NOTE: If you have a HEAT PUMP with auxiliary heat and you
have enabled the Heat Pump features of your thermostat, this
section applies to your system.
If your Heat Pump malfunctions or cannot maintain your desired
temperature you may occasionally need to access the EMER button
on the key pad. This tunrs on your auxiliary heat source and will
continue until you turn it off.
• To turn on the EMER (auxillary heat) press the EMER button. The
EMER ON icon will flash.
• To turn off EMER (auxillary heat) press the EMER button again.
4 Special Features cont.

ritetemp 8050C Specifications

General

Brand	ritetemp
Model	8050C
Category	Thermostat
Language	English

Summary

Operation 8050C

Heat Pump EMER Button

Explains how to use the EMER button for auxiliary heat operation on heat pump systems.

Set Clock

Set Day of the Week

Guides setting the current day of the week on the thermostat display.

Set Time of Day

Guides setting the current time of day on the thermostat display.

Auto-run

Auto-Run Energy-Star Program

Program

Program Setting Overview

General steps for setting heating/cooling programs and time slots.

Set Time Slot and Temperature

How to select time slots (P1-P4) and set desired temperatures.

Special Features cont.

Manual Override

Temporarily changing temperature settings manually.

Temp Hold

Low Battery Warning

Status Indications

Differential Setting