Need help?Do you have a question about the ritetemp 8082C and is the answer not in the manual?
General| Type | Programmable Thermostat |
|---|---|
| Temperature Range | 40°F to 90°F |
| Display | Digital |
| Display Type | LCD |
| Backlit | Yes |
| Hold Feature | Yes |
| Filter Change Alert | Yes |
| Battery Indicator | Yes |
| Power Source | Battery (AA x2) |
| Compatibility | Single-stage heating and cooling systems |
| Programmable Schedule | 7-day programming |
Touch to cycle through days and select the current day of the week.
Touch the LOCK icon for 5 sec to lock or unlock custom settings.
Touch to select the day of the week for programming target temps.
Touch to set the time of day for each time period to start.
Select Program A (4 time slots) or Program B (2 or 6 time slots).
Cycle through days to select the current day for configuration.
Choose between Program A (4 time slots) or Program B (2 or 6 time slots).
Cycle through days of the week to select the desired day for programming.
Use arrows to set the start time for the selected time period.
Set a permanent hold temperature. HOLD icon flashes until de-selected.
Manually activate auxiliary heat source for heat pumps when needed.
Prevent changes to custom settings. Lock/unlock by touching LOCK icon for 5 seconds.
Adjust target temperature via remote; TEMPORARY icon blinks, returns to home screen.
To Next Page
