Need help?Do you have a question about the ritetemp 8022 and is the answer not in the manual?
General| Type | Programmable Thermostat |
|---|---|
| Stages | 1 Heat / 1 Cool |
| Programmability | 7-Day Programmable |
| Power Source | 2 AA Batteries |
| Display | LCD |
| Compatibility | Single Stage Heating and Cooling Systems |
Procedure to set the current day of the week on the thermostat display.
Procedure to set the current time of day on the thermostat display.
Chart outlining preprogrammed temperature settings for the Energy-Star program.
Step to choose the day of the week for custom temperature programming.
Step to select a specific time period (P1-P4) for programming.
Adjust the desired temperature for the selected time slot using UP/DOWN buttons.
Set the start time for the selected time slot, moving forward or backward.
Select and program subsequent time slots (P2, P3, P4) with their temps and times.
Procedure to program an alternate 'Special Day' program for unique needs.
How to activate the 'Special Day Program' for unexpected home situations.
Configure temperature difference for heating/cooling system cycles.
Temporarily change the control temperature by 1 degree per step.
Hold a specific temperature until manually released or mode is changed.
Track furnace run time to remind about air filter replacement.
Enable or disable program lock to prevent changes in custom settings.
Indicates when thermostat batteries are low and need replacement.
Select between Centigrade or Fahrenheit display for temperature.
Choose between 12-hour or 24-hour format for time display.
To Next Page
