Need help?Do you have a question about the ritetemp 8085c and is the answer not in the manual?
Requirement to set the MODE SWITCH to HEAT or COOL to access all thermostat control functions.
Description of the preprogrammed Energy-Star™ efficient program (Program A) and recommendation for its use.
Instructions to select HEAT/COOL, press PROGRAM, and touch PROGRAM icon to run the Energy-Star™ program.
Selecting program A or B, and choosing the day of the week for programming.
Setting the time slot, time of day, and desired temperature for each program period.
Overview of the three manual override commands: HOLD, EMER, and TEMPORARY override.
Setting a permanent HOLD temperature or a temporary override for the current time slot.
Manually engaging the auxiliary heat source (EMER) for Heat Pump users when needed.
General| Display | LCD |
|---|---|
| Programmable | Yes |
| Hold Feature | Yes |
| Temperature Range | 40°F to 90°F |
| Power Source | Battery |
| Compatibility | Heat Pump |
To Next Page
