PG 1
PG 2
HE
A
T
CO
OL
A
UTO
ON
O
F
F
F
AN
TEMP
UP button
TEMP
DOWN button
Temperature
Display
Farenheit/Celcius
indicator
HEAT/COOL
Mode Switch
Fan
Switch
RESET
button
Current Temperature
Display
SET Temperature
Display
Operation 8029B
Statement of use: The 8029B can be used with most 24
volt gas, oil or electric heating and air conditioning systems,
single-stage heat pumps or gas millivolt heating systems. It
cannot be used with 120 volt heating systems or
multistage heat pumps.
1 Configure
Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the ambient
temperature. Set the Fan switch to automatic.
Your thermostat is now in operation.
In the winter, set the system switch to HEAT to control your heating system.
In the summer, set the system switch to COOL to control your air conditioner.
In spring and fall or when windows are open, you can set the system switch OFF.
Setting the FAN switch to AUTO automatically runs your system's fan during heating and
cooling.
Setting the FAN switch to ON runs your system's fan continuously even without heating
or cooling.
2 Set Temp
3 Operate
Press the TEMP UP and TEMP DOWN buttons to select the desired temperature.
The SET icon will be displayed with your desired temperature. ( The display will return to
the current temperature in 5 sec if no button is pressed).
RO
O
M
T
E
MP
H
E
AT
ROOM TEMP TARGET TEMP
To Next Page
Need help?
General
