5. MAINTENANCE
ﺔﻧﺎﻴﺼﻟا
5./2
Completely replace oil each 1000 weldings and at
least once a year. (Used oil is very pollutant: take it
to the nearest hazardous waste collection site.)
Use recommended oils only (see page 5 for
specifications).
Check the oil level once a month. It must reach the
level mark at the dipstick.
A: Tank cap with oil
dipstick.
ﻦﻴﺨﺴﺘﻟا حﻮﻟ
ب صﺎﺨﻟا ﺖﻴﺒﻤﻟا ﻲﻓ ﻪﻌﺿو ﻦﻴﺨﺴﺘﻟا حﻮﻟ ﻒﻈﻧ)ءﻼﻄﻟا ﺔﻳﺎﻤﺤﻟ (تﺎﻴﻠﻤﻌﻟا ﺪﻌﺑ .
HEATING PLATE
Clean and place the heating plate in its housing (for coating protection) after operations.
FACER
ةاﻮﺴﻤﻟا
ﺔﻳرود ةرﻮﺼﺑ ﻦﻴﺗﺮﻔﺸﻟا لﺪﺒﺘﺳا .
ﻈﻧتﺎﻴﻠﻤﻌﻟا ءاﺮﺟإ ﺪﻌﺑ ﺎﻬﺑ صﺎﺨﻟا ﺖﻴﺒﻤﻟا ﻲﻓ ﺎﻬﻌﺿو ةاﻮﺴﻤﻟا ﻒ.
Replace both blades periodically.
Clean and place the facer in its housing after operations.
A
To Next Page
Loading...
