8 Storage and disposal
RITTAL cooling unit assembly and operating instructions 41
EN
8 Storage and disposal
During storage, the cooling unit must stand upright.
The closed cooling circuit contains refrigerant and oil
which must be properly disposed of for the sake of
the environment. Disposal can be performed at the
RITTAL plant.
Please contact us for advice.
9 Technical specifications
Fig. 84: Rating plate (technical specifications)
– Observe the mains connection data (voltage and
frequency) as per the rating plate.
– Observe the pre-fuse as per the specifications on
the rating plate.
Caution! Risk of damage!
The cooling unit must not be subjected
to temperatures above +70°C during
storage.