Rittal SR IT - Installation of Tooless 2 U Blanking Panel(Optional Accessory)

用户手册(Manual)
48
11．Installation of tooless 2U blanking panel
1. Tooless 2u blanking panel can be installed at any position in the mounting angle U surface，The
blind plate adopts the whole injection molding process，the Flame retardant rating of this panel is
V0, The 2U Blanking panel can also be divided into two 1U Blanking panels.
material
number
English description
Chinese
description
note
1194506
SR IT 2U blind panel
SR IT 2U 盲板
1PU=5EA
2.Dimention of tooless blanking panel
3. Installation of tooless 2U blanking panel
Step1:Push the left hook of the blanking panel
into the square hole of mounting angle.
Step2:Push the right hook of the blanking panel
into the square hole of mounting angle.