Rittal SR IT - Performance of Cabinet Parameters; Description of Cabinet

用户手册(Manual)
50
Performance of cabinet parameters
Description of cabinet
 Cabinet internal equipment installation height：2000 high cabinet 42U, 2200 high cabinet
47U；
 Color of cabinet：RAL 9005 sandtxt;
 Surface treatment：doors、top panel、side panel：ecoating+painting，The surface spraying
thickness reached 70-130µm，The hardness of the surface is greater than 2H，Spraying
adhesion to achieve level 0 international standard，frame is only ecoated in ral9017;
 Cabinet plate material：En10130-DC01;
 The load of the cabinet.：No less than 1000 kg.;
 Cabinet front: Configuration1：Single vented door，The ventilation rate is not less than 78%，
The door is equipped with four point lock rod，comfort handle and safe insert，The front
door open Angle no less than 130 °。
Configuration2：Single glassed door，The door is equipped with four point
lock rod，comfort handle and safe insert，The front door open Angle no less than 130 °。
 Cabinet Rear：Configuration1：Double vented door, The ventilation rate is not less than 78%，
The door is equipped with three point lock rod，crank lock handle and safe insert，door open
Angle no less than 130 °
Configuration2：Single door, The door is equipped with four point lock rod，
comfort handle and safe insert，The door open Angle no less than 130 °。
Configuration3：Rear panel。
 Each cabinet is equipped with two pairs standard 19inch mountine angles，the Position can
be moved back and forth，the width of the installation mounting angle is 465.1MM，Each
"U" position is marked with a silk screen，The mounting angle process is DC01+ecoat，600
width cabinet equipped with one pair depth stay，800 width cabinet equipped with top and
bottom mounting angle bracket。