Riva RC1202HD - Appendix (A): Specifications; Summary

24
www.rivatech.de
APPENDIX (A): SPECIFICATIONS
Summary
Camera Module
Image Sensor
1/2.7” 1080p CMOS
Effective Pixels
1920 x 1080 (HD 1080p, 2M)
Scanning system
Progressive Scan
Min. Illumination
Color: 0.5 lux, F1.2
BW: 0.001 lux, F1.2 (Sens-up 32X)
AGC Control
Auto
Lens (Optional)
3.1~8 mm, F1.2, Auto Iris
Day & Night
Removable IR Cut Filter
Smart Edge Enhance
Supported (Auto adjust the sharpness by Lux)
2D-DNR
Supported (1 ~ 16)
DSS (Sens-up)
2X ~ 32X
White Balance
ATW / Manual / Push
Video
Compression Format
H.264, MJPEG Selectable per Stream
Number of Streams
Dual Stream, Configurable*
Resolution
1920x1080, 1280x720, 800x450, 480x270,
320x180
Compression FPS
Configurable up to 30fps@1080p*
Motion Detection
Built-in
Burnt-in Text (Digital)
Video stream overlay text
Output
Analog video output for installation only
Audio
Input / Output
1/1 channel
Compression Format
G.711
Function
Digital Input
1 channel
Digital Output
1 channel
RS-485
Support
Network
10/100 Base-T
Protocol
TCP/IP, UDP/IP, HTTP, RTSP, RTCP, RTP/UDP,
RTP/TCP, SNTP, mDNS, UPnP, SMTP, IGMP,
DHCP, FTP, DDNS, SSL v2/v3, IEEE 802.1X, SNMP
v2/v3
Power over Ethernet
Supported
USB 2.0
Support (Local storage, Wireless LAN)
SD Slot
Support (SD up to 32 GB)
* When VCA is activated, only one camera stream will be available and frame rate is
limited to 15fps@1080p. Limitations are based on V.1.3.0 firmware release and
could be changed without notice.