Rivacold XM670K - Introduction; Warnings; General Description; Identification Data and Information on the Manual

EN
XM670K
4
Instructions for useRev.v. 01 | 9600- 0099 | © 2022 RIVACOLD srl
1. Introduction
1.1 Warnings
ATTENTION: the controller must never be opened.
ATTENTIONThis manual is an integral part of the
product and must be kept with the appliance for
quick and easy reference.
1.2 General description
The XM670K packaged unit controller is designed
for medium and low temperature applications.
This instrument can be connected in a local
network of up to eight connected units. It can
operate, depending on programming, as a single
controller or following commands received from
other controllers.
The XM670K allows the following functions to be
managed:

defrosting

synchro display

synchro set- point

light control

cold call command

temperature probe synchro
The XM670K is equipped with six relay outputs to
control:

compressor

defrosting (which can be done with hot gas
or heaters)

evaporator fans

lights

alarms

a configurable auxiliary output
The XM670K is equipped with up to three
configurable probes for cold room temperature
control, end-of-defrosting temperature and
general temperature display. Furthermore, it is
equipped with three parameter-configurable dry
contact digital inputs.
The instruments are equipped with a HOTKEY port
for easy programming.
The instrument has an RS485 serial output that
allows devices to interface with monitoring and
supervision systems via Modbus RTU protocol
(E.g.: Carel, Dixell).
The configuration of any probe/digital inputs will
vary depending on the type of machine in which
the controller is mounted.
1.3 Identification data
and information on the
manual
1.3.1 Manufacturer's contacts
RIVACOLD srl
Montecchio - via Sicilia, 7
61022 Vallefoglia (PU)
Italy
Tel: +39 0721 919911
Fax: +39 0721 490015
e- mail: info@rivacold.com
1.3.2 Manual data
Title: XM670K - Instructions for use Code:
9600- 0099_controller XM670K Month and
year of publication: 11- 2022
1.3.3 Manual updates
Code
Publication
date
Updates
9600-
0099
11- 2022
First publication
1.3.4 Documentation provided
Note: the controller is mounted on several product
ranges. Please refer to the respective Instruction
manuals
Manual
Code
Date
Instructions for use (this
manual)
9600- 0099 -
11- 2022
11-
2022