RiverRidge 02-144 - Step-by-Step Assembly Instructions; Step 1: Top Board and Middle Shelf Prep; Step 2: Bottom Trim Assembly

STEP 1
1. Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2. Insert 4 wood dowels (C) into wood dowel holes on top board (1).
3. Screw 4 cam bolts (A) into cam bolt holes on middle shelf (2).
4. Insert 4 wood dowels (C) into wood dowel holes on middle shelf (2).
5. Repeat above steps for middle shelf (2).
STEP 2
1. Screw 6 cam bolts (A) into cam bolt holes on bottom shelf (3).
2. Insert 4 wood dowels (C) into wood dowel holes on bottom shelf (3).
3. Attach 1 hinge (D) to left bottom trim (10) by inserting 2 screws (E) through holes on hinge (D)
and tighten to left bottom trim (10).
4. Attach 1 hinge (D) to right bottom trim (11) by inserting 2 screws (E) through holes on hinge
(D) and tighten to right bottom trim (11).
5. Attach left bottom trim (10) to middle bottom trim (9) by inserting 2 screws (E) through holes
on hinge (D) and tighten to middle bottom trim (9).
6. Attach right bottom trim (11) to middle bottom trim (9) by inserting 2 screws (E) through holes
on hinge (D) and tighten to middle bottom trim (9).