RiverRidge Somerset 06-037 User Manual

ASSEMBLY INSTRUCTIONS
Somerset Single Door Floor Cabinet
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.

RiverRidge Somerset 06-037 Specifications

General

Brand	RiverRidge
Model	Somerset 06-037
Category	Indoor Furnishing
Language	English

Summary

General Safety and Assembly Precautions

Adult Assembly Required

Product requires assembly by an adult due to small parts and potential injury risks during assembly.

Furniture Tip-Over Warning

Serious or fatal injuries can occur from furniture tip-over; provides instructions to help prevent tip-over.

Parts List

Assembly Steps

Step 1: Drawer Assembly

Attach drawer side panels to the back board and slide in the bottom board.

Step 3: Drawer Slides Installation

Attach drawer slides to the left and right drawer side panels using screws.

Step 4: Support Board Preparation

Prepare support boards by inserting dowels and cam bolts, and attach hinges.

Step 5: Side Panel and Door Assembly

Attach support boards to side panels, install drawer slides, and attach door hardware.

Step 6: Main Cabinet Structure

Assemble side panels, cross bar, and bottom board using cam bolts and locks.

Step 7: Top Board Attachment

Attach the top board to the side panels using wood dowels and cam locks.

Step 8: Back Board Installation

Secure the back board to the pre-assembled cabinet using screws.

Step 9: Wall Anchoring

Secure the cabinet to the wall using plastic anchors and screws for stability.

Step 10: Drawer and Door Fitting

Insert the assembled drawer into the cabinet and attach the door.

Step 11: Shelf Installation

Insert shelf holders at desired height and place the shelf onto them.