RiverRidge Somerset Spacesaver User Manual

ASSEMBLY INSTRUCTIONS
RiverRidge
®
Somerset Spacesaver
ITEM #: 06-040 White
ITEM #: 06-079 Gray
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken
in unpacking and assembling this item to keep small parts away from children. During assembly
children should be kept away from the product due to possible risk of injury.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.

RiverRidge Somerset Spacesaver Specifications

General

Brand	RiverRidge
Model	Somerset Spacesaver
Category	Indoor Furnishing
Language	English

Summary

RiverRidge Spacesaver Assembly Instructions

Adult Assembly Requirement

Assembly requires adult supervision due to small parts and potential injury risks.

Safety Warning Reference

Alerts users to critical safety information regarding furniture tip-over on the next page.

Critical Safety Warnings

Furniture Tip-Over Prevention Guide

Details on preventing tip-overs, including securing furniture to the wall and weight distribution.

Weight Limit and Overloading Precautions

Specifies maximum weight capacity per shelf and total, warning against overloading.

Parts List: Furniture Components

Component Identification and Quantities

Visual representation and list of all furniture components and their required quantities for assembly.

Parts List: Hardware and Support

Hardware, Tools, and Ordering Information

Lists all hardware, necessary tools, and details for ordering replacement parts.

Assembly Steps: Door and Support Board Preparation

Step 1: Door Hardware Attachment

Attaches magnet plates and handles to the left and right doors using specified hardware.

Step 2: Support Board Assembly

Prepares support boards by adding dowels, cam bolts, and attaching hinges.

Assembly Steps: Panel and Shelf Integration

Step 3: Upper Panel and Support Board Connection

Connects support boards to upper side panels using dowels and cam locks for stability.

Step 4: Shelf and Upper Panel Attachment

Attaches the main shelf to upper side panels using cam bolts and dowels, secured with cam locks.

Assembly Steps: Top Board and Lower Frame Construction

Step 5: Top Board Attachment to Side Panels

Secures the top board to the upper side panels using cam bolts and cam locks.

Step 6: Lower Frame Assembly

Connects lower side panels with cross bars using cam bolts and cam locks for the base structure.

Assembly Step: Connecting the Middle Section

Step 7: Attach Middle Connection Board

Attaches the middle connection board to the lower frame assembly using dowels and cam bolts.

Assembly Steps: Joining Major Sections

Step 8: Prepare Middle Connection Board for Joining

Screws cam bolts into the middle connection board in preparation for joining sections.

Step 9: Connect Upper and Lower Assembled Sections

Joins the upper and lower assembled sections of the unit using cam bolts and cam locks.

Assembly Steps: Back Panel and Door Installation

Step 10: Attach Back Panels

Installs the upper, middle, and lower back panels to the unit using screws and a plastic connection strip.

Step 11: Install Doors

Attaches the left and right doors to the side panels using hinges and screws.

Assembly Steps: Final Securing and Shelving

Step 12: Secure Unit to Wall

Provides options for securing the unit to the wall using anchors for stability and safety.

Step 13: Install Adjustable Shelf

Places shelf holders into the unit and then installs the adjustable shelf onto them.

Post-Assembly Checks and Maintenance

Periodic Inspections and Safety Reminders

Advises checking for loose parts, securing the unit, and addresses potential hazards.

Care Instructions and Document Storage

Provides guidance on cleaning the unit and keeping assembly instructions for future reference.