11
OPERATION INDICATION
3. Check the electricity system: ensure the power is enough for the estimated range; Fix the indication lights
when there is any malfunction to the meter before drive.
5. Others: check screws of body are well locked; adjust the handle bar and saddle; unlock the body before
driving, well lock the rear case; release the support rack to right direction; adjust the angle of rear mirror.
Driving
1. Turn the pedals gradually withershins to control the speed from slow to fast. Slowly accelerate to protect
the components when start driving.
2. Relax the pedals clockwise to get slowly driving or stopping. The speed will be faster when turn to rotation
terminal during driving.
4. Braking and relax the pedals to original position when downgrading.
5. Power off or braking for any emergency to avoid any unusual driving.
6. Never drive in seeper which is deeper than the bottom surface of hub to avoid malfunction to the hub,
although it can be drove in rainy or snowy weather.
Preparaton
4. Check the brakes: See if the power can be cut properly when braking. Repairing before using.
1. Carefully reading to well-know the item before driving.
3. Braking to get more slowly driving meanwhile relax the pedals when swerving to the corner. Drive in
normal way after pass by.
2. Check the tyres: make sure tyres with enough air inside; replace the tyre from nominated repairing
station if the dints of outer tyre are less than 2mm or any cracks to avoid skidding when driving.
T7
To Next Page
Loading...
