Need help?Do you have a question about the RM Italy BLA350 PLUS and is the answer not in the manual?
Details the components, indicators, and controls on the front panel of the amplifier.
Describes the input/output connectors and AC power socket on the rear panel.
Instructions for connecting the amplifier to the mains AC supply.
Discussion on the importance and methods of RF grounding for the station.
Guidance for using the amplifier with CW mode and PTT.
Steps to prepare the amplifier for its first operation.
Explanation of the amplifier's standby mode functionality.
Instructions on how to access and use the amplifier's menu system.
Allows selection between Celsius and Fahrenheit for temperature display.
Enables internal VOX for PTT control when transceiver lacks PTT output.
Adjusts the delay for internal VOX to prevent interruptions during SSB.
Options to change fan operation modes and speed settings.
Details protection against excessive input power from the transceiver.
Describes protection against overheating of transistors and heat sink.
Explains protection against high antenna VSWR.
Covers protection related to incorrect low pass filter selection.
Details protection against operating outside specified frequency limits.
Caution regarding high duty cycle modes and continuous operation.
Information on optimal input drive levels for desired output power.
Guidance on operating below saturated output for better performance and longevity.
Details the terms, conditions, and coverage of the product warranty.
To Next Page
General
