RoadHog RH4060 - Call Before You Dig; Mandatory Safety Shutdown Procedure

7
2.3 CALL BEFORE YOU DIG
ACCIDENTS ARE
PREVENTABLE WITH YOUR HELP
Understand and comply with applicable laws and
regulations.
 Call local utilities before you dig.
1-888-258-0808
 Know the location of underground gas, water
and electrical lines.
 Inspect area for holes, drop-offs, or unstable
ground.
 Know the weight limitations of operating
surfaces and clearances.
 Remember: Safe operation begins with the
operator.
BEFORE OPERATING THIS
EQUIPMENT, THE FOLLOWING
SAFETY INFORMATION SHOULD BE
READ AND UNDERSTOOD. IN
ADDITION, EACH INDIVIDUAL
WORKING WITH THE EQUIPMENT
SHOULD BE FAMILIAR WITH THE
SAFETY PRECAUTIONS
2.4 MANDATORY SAFETY SHUT-
DOWN PROCEDURE
BEFORE cleaning, adjusting, lubricating, or ser-
vicing this unit, ALWAYS follow the MANDATO-
RY SAFETY SHUTDOWN PROCEDURE:
1. Lower loader arms and roll attachment for-
ward until it is flat on the ground.
2. Apply loader parking brake and stop the
loader engine.
3. Remove loader key and keep with you while
working on the attachment.
4. Turn cold planer engine off and remove key
and keep with you while working on attach-
ment.
FAILURE TO FOLLOW THE
PROCEDURES BEFORE CLEANING,
ADJUSTING, LUBRICATING, OR
SERVICING THIS UNIT COULD LEAD
TO SERIOUS INJURY OR DEATH.
WARNING
WARNING