EasyManua.ls Logo

Roberts Blutune 200 - Finding New DAB Stations; Performing a Station Scan

Roberts Blutune 200
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Display options - DAB cont.
f. Bit rate/audio type Displays the digital bit rate and audio
type for the current DAB radio station.
g. Signal strength Displays signal strength for the station
being listened to. The clear rectangle
shows the minimum required signal
strength for clear DAB reception.
Finding new stations - DAB
As time passes new stations may become available. To fi nd new
stations proceed as follows:-
1. Press and hold the Menu button. 'DAB Menu' will appear on the
display.
2. Press and release the Select button to enter the DAB menu.
3. Press the Tuning Up or Down buttons until 'Scan' appears on
the display.
4. Press and release the Select button. The display will then show
'Scanning...' and your sound system will perform a scan of the
Band III DAB channels. As new stations are found the station
counter on the right-hand side of the display will increase and
any new stations will be added to the list stored in the sound
system.
3
3
f
g
1
2,4
BBC Radio 4
128kbps / Mono
BBC Radio 4
Scanning... 28
DAB Menu
<
>
DAB
Scan
<
>

Table of Contents