Roberts Blutune 200 - Treble and Bass Settings

53
Treble control
1. Follow steps 1-4 on the proceeding page to enter the Equalizer setup
menu.
2. Press the Tuning Up or Down buttons to cycle through the options
until 'Treble' appears on the display.
3. Press and release the Select button. The current treble setting will be
displayed.
4. To adjust the treble setting press the Tuning Up or Down buttons until
the desired level is displayed.
5. Press and release the Select button to confi rm the setting.
Bass control
1. Follow steps 1-4 on the proceeding page to enter the Equalizer setup
menu.
2. Press the Tuning Up or Down buttons to cycle through the options
until 'Bass' appears on the display.
3. Press and release the Select button. The current Bass setting will be
displayed.
4. To adjust the Bass setting press the Tuning Up or Down buttons until
the desired level is displayed.
5. Press and release the Select button to confi rm the setting.
3,5
2,4
2,4
3,5
2,4
2,4
<
>
Treble
-
+
Treble
<
>
Bass
-
+
Bass