Roberts Blutune 200 - Snooze Function; Viewing the Alarm Settings

48
Clock and Alarms
Viewing the alarm settings
1. To view the alarm settings press and hold the Menu button.
2. Press the Tuning Up or Down buttons until 'Set alarm' shows on the
display. Press and release the Select button to enter alarm setup
menu.
3. Press the Tuning Up or Down buttons to display the required alarm,
1 or 2. Press and release the Select button.
4. Press the Tuning Up or Down buttons until 'View' shows on the display.
5. Press and release the Select button to cycle through each of the
settings for the chosen alarm.
1
2-5
2-4
2-4
Snooze function
1. When the alarm sounds, pressing any button other than the
On / Standby or Volume buttons will silence the alarm for 5 minutes.
The Snooze symbol (
Z
Z
Z
) will fl ash. This sequence can be repeated
during the 60 minute alarm period.
2. To cancel the Snooze function, press the On / Standby button.
2
Alarm 1
<
>
Alarm 1
<
>
View
Set alarm
<
>