30
Software version
The software display cannot be altered and is just for your reference.
Ensure your radio is switched on.
1. Press and release the On/Off button to switch on your radio.
2. Press and hold the Menu button.
3. Rotate the Tuning control until 'SYSTEM' shows on the display.
4. Press and release the Tuning control.
5. Rotate the Tuning control until 'SW VER' shows on the display.
6. Press and release the Tuning control. The display shows the software
information.
7. Press and release the Menu button to exit the software display.
3-6
2,7
1
To Next Page