EasyManua.ls Logo

Roberts CR2003 - Nap Timer; Cancelling Alarms; Alarm Sound Level Control

Roberts CR2003
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
18
1
1
2
3
Alarm sound level control
1. The alarm sound level on both radio and buzzer alarms can be
adjusted using the Alarm sound level control located on the
underside of your clock radio.
1
Nap timer
1. The Nap timer is a short term alarm which can be set for a delay of
10-120 minutes in 10 minute steps. Press and release the Nap
button until the required Nap time is shown on the display. The
buzzer alarm will sound after the Nap time has elapsed.
2. Press the On/Off button to silence the Nap buzzer alarm
3. The Nap timer can be cancelled before the Nap time has elapsed by
pressing and releasing the Nap button until the word OFF appears
in the display.
1
2
3
Cancelling alarms
1. Press the Alarm 1 or Alarm 2 buttons (depending on which alarm
you wish to cancel).
2. Press the Set button the alarm symbols will flash in the display.
3. Repeatedly press and release Mode button until only the or
symbols appear in the display.
4. Press the Alarm 1 or Alarm 2 button to confirm cancellation of
alarms. Alarm symbols or will disappear from the display after
3 seconds indicating alarms have been cancelled.
4
4

Related product manuals