If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
20
Time zone switch
1. The Time zone switch is used to provide offsets of -1 to + 2 hours
relative to GMT (UTC).
This facility would only be used if your clock radio is used in another
country that is within range of the UK time signal transmitter e.g.
France where the time is GMT (UTC) +1.
For normal operation within UK please ensure the Time zone switch
is set to the 0 UTC position (factory set position).
Headphone socket
1. A 3.5mm Headphone Socket located on the right-hand end of your
clock radio is provided for use with either headphones or an earpiece.
Inserting a plug automatically mutes the internal loudspeaker.
1
Reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. With the aid of a suitable implement (the end of a paper clip) press the
reset button located on the underside of your radio for at least 3
seconds, this will reset the microprocessor, clock time and clear all
stations stored in preset memory.
1
1
To Next Page
Loading...
