Roberts CRD-9 - Manual FM Tuning Guide

11
Manual tuning - FM
1. Press the StandBy button to switch on your radio.
2. Press the FM/DAB button to select the FM band. Fully extend the
Telescopic aerial .
3. Press the Tuning up or down buttons to tune to a station. The
frequency will change in steps of 50kHz.
4. When the waveband end is reached the radio will recommence
tuning from the opposite waveband end.
5. Set the Volume control to the desired setting.
6. To switch off your radio press the StandBy button.
1
2
3
3
5
5
6