EasyManua.ls Logo

Roberts iDREAM 2 - Snooze Function; Setting the Snooze Time

Roberts iDREAM 2
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Snooze function
1. When the radio, iPod or buzzer alarm sounds, pressing the Snooze
button will silence the alarm for the selected number of minutes. The
Snooze duration can be adjusted between 5 and 20 minutes in 5 minute
increments. The default setting is 5 minutes.
When the Snooze button has been pressed during an alarm, the display
will show the Snooze symbol . This sequence can be repeated during
the 60 minute alarm period.
2. To cancel the Snooze function, press the On / Standby button.
To set the snooze time
1. Press the On / Standby button to switch on the clock radio.
2. To set the snooze to the desired snooze time, press and release the
Menu button.
3. Press the Tuning Up or Down button until 'CLOCK' appears on the
display. Press and release the Select button.
4. Press the Tuning Up or Down button until 'SNOOZE' appears on the
display. Press and release the Select button. 'SNOOZE05' will be
displayed.
5. Press the Tuning Up or Down buttons to choose the desired snooze
setting from between 5, 10, 15 and 20 minutes.
6. Press and release the Select button to enter the desired snooze duration.
The radio will exit the menu options.
1
3-6
3-5
3-5
2

Related product manuals