If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
14
Dynamic Range Control (DRC) - DAB
The DRC facility can make quieter sounds easier to hear when your radio
is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default)
DRC 1/2 Medium compression applied.
DRC 1 Maximum compression applied.
1. Press the On / Off button to switch on your radio.
2. Press and release the DAB / FM button until the DAB band is selected.
3. Press and hold the Advanced / Info button.
4. Rotate the Tuning / Select control until 'DRC VAL' appears on the
display. Press and release the Tuning / Select control. The display
will show the current DRC value.
5. Rotate the Tuning / Select control to select the required DRC setting
(default is 0).
6. Press and release the Tuning / Select control to confi rm the setting.
After several seconds the display will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
3
4-6
2
To Next Page
Loading...
