If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
24
7. Press and release the Tuning / Select control to cause the alarm
minute digits to fl ash on the display.
8. Rotate the Tuning / Select control to choose the desired alarm minute.
9. Press and release the Tuning / Select control to enter the setting.
The alarm source option will fl ash on the display.
10. Rotate the Tuning / Select control to choose the desired alarm source
(BUZZER, DAB, FM, MSG 1 (recorded message 1), MSG 2 (recorded
message 2), BACK (will go back to the previous step).
Note: To use the message option a message must have been previously
recorded, see 'Recording a voice message' page 22.
11. Press and release the Tuning / Select control to enter the setting.
The alarm day option will fl ash on the display.
12. Rotate the Tuning / Select control to choose the desired alarm day
option:
Daily - will sound everyday
Once - will sound at one time only
Weekdays - will sound only on weekdays
Weekends - will sound only on weekends
Back - will go back to the previous step
13. Press and release the Tuning / Select control to confi rm the alarm
settings. 'SAVED' will show on the display before exiting the alarm
setup.
7-13
To Next Page
Loading...
