If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
Example: To store a station in preset location 15, Press
the "M" button, then press numbered button 1, press
and hold down numbered button 5 for more than 2
seconds.
Note: If all the preset memory locations are full, pushing
the "M" button will cause the display to show FUL. If you
still want to store a new station press any numbered but-
ton for more than 2 seconds, the new station will be stored
in the selected memory location, the original station in
this location will be cancelled.
31
1. Tune to the desired frequency using one of the
previously described tuning methods. Press the 'M'
button and then hold down the required memory preset
button for more than 2 seconds.
e.g. to overwrite memory preset 12, tune to the required
station, press numbered button '1' and then press and
hold down numbered button '2' for more than 2
seconds.
Overwriting a station in preset memory
To Next Page
