50
1. To listen to FM stereo broadcasts, tune to the required
station, plug in headphones and set the "Mono/Stereo
switch located on the left side of the radio to the "ST"
position. If the station being received is weak some
hiss may be audible, to reduce the hiss set the "Mono/
Stereo" switch to the "MO" position to return to mono
operation.
Note: FM stereo is only available via headphones.
Mono/Stereo switch
Display backlight
Pressing the "Light" button located on the top of the ra-
dio will turn on the light and illuminate the display for ap-
proximately 7 seconds.
To Next Page
