If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
51
MW step size switch
1. This switch located on the underside of the radio pro-
vides a means of changing the MW step size from
9kHz to 10kHz. In Europe and most other parts of the
world set the switch to the 9kHz position. For the USA
and Canada set the switch to the 10kHz position.
The "Lock" switch located on the underside of the radio
is used to prevent unintentional operation.
1. Set the "Lock" switch to the 'On' position, the
symbol will appear in the display. The "Power" and all
other buttons will be disabled. This will prevent acci-
dental operation when the radio is packed in a suit-
case or carrying pouch. To release the "Lock" switch
move the switch to the 'Off' position, the symbol
will be removed from the display.
Lock switch
To Next Page
