If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Operating your radio - manual tuning
1. Switch on your radio by pressing the Power button.
2. Select the required waveband by pressing the Band button. The
waveband selected will appear in the display. On FM fully extend the
Telescopic aerial. On MW and LW rotate your radio for best
reception.
3. Rotate the Tuning control to select the required frequency. The
frequency steps are:- FM 50kHz, MW 9kHz and LW 1kHz. Adjust
the Volume control , Bass and Treble controls to the required
settings.
4. Press the Power button to turn off your radio.
12
r9999 instruction book.PMD 7/28/2005, 4:07 PM13
To Next Page
Loading...
