20
Confi guration
Network remote control options
Network PIN setup (PIN number)
Your radio has the option of being controlled by an application installed on
an Apple iPhone, iPod touch, iPad or equivalent Android device. The PIN
number facility allows you to ensure that your radio can only be controlled
by your own device rather than someone else's.
The remote control application is called UNDOK and is available from the
Apple App Store and Google Play Store for your device.
UNDOK will try to use the default PIN of '1234' to control your radio.
You may change the PIN if desired using the 'NetRemote PIN Setup' option
in the Network settings menu. The updated PIN should then be used in
the UNDOK app to allow the app to reconnect to the radio. The app will
prompt you for the PIN as needed.
Keep network connected
Your radio has the option to shut down its WiFi connection when it is in
Standby. This minimises power consumption but it does mean that you will
need to switch the radio on manually in order to use the 'Play to' / 'Cast to
Device' function or any remote control software such as the UNDOK app.
If you need to be able to remotely control the radio even when it has been
put into Standby, then you can choose to keep the network connected by
using the 'Keep network connected' option in the Network settings menu.
In the Standby mode display the WiFi signal indicator is shown with or
without a cross through it according to the state of the connection.
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Manual settings
NetRemote PIN Setup
Network profile
Clear network settings
Keep network connected
NetRemote PIN Setup
The UNDOK app logo.
To Next Page
Loading...
