If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
1-4
Disabling alarms
1. To disable a single alarm enter the alarm setup menu (see page 59) and
rotate the Tuning/Select control until the desired alarm is highlighted
on the display. Press the Tuning/Select control.
2. Rotate the Tuning/Select control until the 'Enable:' option is highlighted
on the display.
3. Press and release the Tuning/Select control to change the status so
that the display shows 'Enable: Off'.
4. Rotate the Tuning/Select control until the 'Save' option is highlighted
on the display then press the control to save the new setting.
The chosen alarm will now be disabled.
Snooze timer
1. The buzzer or radio alarm can be silenced for 5 minutes by pressing the
Tuning/Select/Snooze control. Should you wish for a longer snooze
duration this can be extended. Pressing the control again while the
radio is snoozed will set the available snooze time to 5, 10, 15 or 30
minutes.
2. While the snooze timer is active the remaining snooze time is shown
next to the fl ashing alarm icon on the clock display.
3. In order to cancel the Snooze timer, press the On/Off button. The
display will briefl y show an 'Alarm Off' message.
62
1
Clock and Alarms
To Next Page
Loading...
