To Next Page

To Previous Page

COOLING DIFFERENTIAL OR SWING.

The cooling differential is factory preset at 0.5°. This means that whenever

the room temperature heats by 0.5° from the temperature setting, the cooling

system will turn on. If the cooling system turns on too often, increase the

temperature differential. To access the COOL SWING setting and adjust the

cooling differential, select COOL and hold down

and

together for

3 seconds. Use

and

to adjust the cooling differential from between 0.2°F

and 2°F. Wait approximately 15 seconds or toggle the system switch to

return to normal operation.

HEATING DIFFERENTIAL OR SWING.

The heating differential is factory preset at 0.4°. This means that whenever

the room temperature cools by 0.4° from the temperature setting, the heating

system will turn on. If the heating system turns on too often, increase the

temperature differential. To access the HEAT SWING setting and adjust the

heating differential, select HEAT and hold down

and

together for

3 seconds. Use

and

to adjust the heating differential from between 0.2°F

and 2°F. Wait approximately 15 seconds or toggle the system switch to

return to normal operation.

ADJUSTING THE TEMPERATURE DIFFERENTIAL

Robertshaw RS8110 User Manual

Other manuals for Robertshaw RS8110