-
34
-
Fig. 5-32
euqrotgninethgiT
D2-21HE,D90HE
N8.11-8.9 ・m
gk021-001( ・ )mc
tf7.8-2.7( ・ ).bl
EH09D
EH12-2D
MAIN BEARING
COVER CP
M6 x 30 BOLT AND
WASHER AY : 9 pcs.
SPACER
CRANKSHAFT
CAMSHAFT
SEALANT
(
Three bond 1216
)
SEALANT
(
Three bond 1216
)
CRANKSHAFT
CAMSHAFT
SPACER
CRANKCASE
CRANKCASE
MAIN BEARING COVER CP
M6 x 30 BOLT AND
WASHER AY : 8 pcs.
(2) Lubricate the oil seal and bearing surfaces.
Coat the surface of the main bearing cover with sealant (Three bond 1216).
Place spacer chosen in step (1) on crankshaft.
Use an oil seal guide when installing the main bearing cover to avoid damaging the oil seal .
Tap the cover into place with a soft hammer.
Main bearing cover EH09D M6 x 30 mm bolt and washer : 9 pcs.
EH12-2D M6 x 30 mm bolt and washer : 8 pcs.
To Next Page
Loading...
