Robin EH09D - 12 Service Data; Clearance Data and Limits

- 70 -
METI
D90HE
DTStimiL
DAEHREDNILYC
ssentalF*
NAHTSSEL
50.0
)200.0(
1.0
)400.0(
htdiwtcatnoctaesevlaV*
.XE.NI
1.1-8.0
)3340.0-5130.0(
0.2
)970.0(
.aidedisniediugevlaV*
815.5-005.5
)2712.0-5612.0(
56.5
)4222.0(
12. SERVICE DATA
12-1 CLEARANCE DATA AND LIMITS
METI
D2-21HE
DTStimiL
DAEHREDNILYC
ssentalF*
NAHTSSEL
50.0
)200.0(
1.0
)400.0(
htdiwtcatnoctaesevlaV*
.XE.NI
0.1-7.0
)930.0-820.0(
0.2
)970.0(
.aidedisniediugevlaV*
815.5-005.5
)2712.0-5612.0(
56.5
)4222.0(
Unit : mm (in.)
Unit : mm (in.)
“STD” in the following table is the parts dimension from the brand new engine or the spare parts.
Whereas, “Limit” shows the maximum allowance for the parts to be used on the engine.
If the measurement exceeds beyond the “Limit”, the part needs to be replaced and/or repaired.