Robin EH11/W01-115 - Page 35

SPECIFICATIONS
ITEM
Cylinder Head
Flatness
Cylinder
Bore (DIA.)
Cylinder Roundness
Cvlindricitv
~~
Piston O.D. (at Skirt in
Thrust Direction). Incl.
Oversize
E: +0.01 in. (+0.25 mn
C:
+0.02 in. (+0.5 mm
Piston Ring
Groove Width
Piston Pin Hole
(DIA.)
Piston Pin O.D.
Clearance
Piston-to-Cylinder
Piston Ring-to-Ring
Groove Clearance
Piston-to Piston Pin
Clearance
Piston Ring End
Gap
STANDARD SIZE
CORRECTIONS
MODEL TOLERANCE LIMIT
I
0 - -0.0012 in. (0 - -0.030 mm)
-0.0039 in. (-0.1 mm)
0.006 in. (0.15 mm)
0.001 in. (0.025 mm)
0.006 in. (0.15 mm)
wo1-210
WO1-150
WO1-115
Oil
wo1-210 Oil
0.008 - 0.0157 in.
(0.20 - 0.40 mm)
0.006 - 0.014 in.
(0.15
- 0.35 mm)
L:Loose T:Tight
9-2