Cleaning Mode
Automatic Cleaning Mode
Press the on the main unit or the on the remote control to start auto-
matic cleaning.
If the battery is low before the cleaning is completed, the host will return
to the charging base for charging.
Warm Reminder: During the recharging process,
there may be a phenomenon that the charging base
cannot be found. At this time, the host will flash a
red light and beep for four times. Please put the
host manually into the charging base for charging.
12
AUTO
Spot Cleaning Mode
Select the spot cleaning mode, the host rotates outward spirally, about 1 m
in diameter to focus on cleaning the local area, and then circle inward to the
starting point. In this mode, the machine increases suction power to provide
you with the best cleaning of the desired location. Place the machine in a
partially dirty place, and then press the on the remote control.
*
To Next Page
Loading...
