Max. Suction Cleaning Mode
In the automatic cleaning/single-room cleaning mode, by pressing the on
the remote control, the main unit can increase the suction force power and
perform deeper cleaning at the maximum suction force. Vacuum suction
function is off by default.
Edge Cleaning Mode
Press the on the remote control and sweep along the edges to ensure
sweeping along the walls and around the furniture legs.
13
Tips: In this mode, the R3000 robot will stop after cleaning about 30
minutes. Please make sure the door is closed to prevent the R3000 from
leaving the room.
Single Room Cleaning Mode
When a specific room needs to be cleaned, press the button on the
remote control.
To Next Page
Loading...
