Accoustic and dust emission levels
The values given are the emission levels; these are not necessary the levels at which
the operator can work safely.
Alhough there is a link between the emission values and the exposion level, it cannot
be used in a reliable way to determine if supplementary measures should be taken.
Noise information
- Measurements as per ISO Norm 7960; Annexe D
Workpost under Level continuous Level accoustic Max. value
load pressure as per index power accoustic pressure
A as per index C
dB(A) dB(A) (MW) dB
Thicknessing 83 97 (5) < 130
Dust emission
The dust emission examination has been carried out by the following approved body:
Prüfinstitut für Holzstaubmessungen
Institut für Werkzeugmaschinen
Universität Stuttgart, Germany
Measurements as per DIN 933 893 ( GS-HO- 05 )
Measurements show that the TRK- value of 2mg/m3 has not been exeeded.
Notification number and date : 08/03/1998 FPH-AZ : 029/98
To Next Page
Loading...
