Transportation of the machine (fig. 1, 1.1)
Depending the method of transport or shipping, you will receive the machine in a
crate or on transport blocks.
Remove the sides of the crate and cover and put the hoisting hooks as shown in fig, 1
and 1.1
The machine can be lifted with a small crane, or a forklift, but severe shocks must be
avoided.
Place the machine on a concrete base, and level the machine perfectly horizontally in
both directions.
The machine is construted in such a manner that it is not necessary to fix it to the
ground, but if you wish to do so, fixing bolts must be introduced through the leveling
bolts in the base plates.
Please find the dimensions of the base plate in the technical data drawing.
fig. 1
fig.1.1
To Next Page
Loading...
