Roboguard 23
Specifications:
Dimensions: 104 X 64 X 27
Weight: 100 g
Current Consumption: +_ 25 mA
Required receiver: Roboguard 433.92 MHz
Required Power Supply: 12V DC
The keypad can control, supervise and monitor up to four
Roboguards and two Roboguard remote buttons, with individual
intruder detected, tamper and supervision LED’s, and optional
audible warning sounds from the speaker output.
The keypad has six highly configurable output switches to connect
to other devices/systems.
The keypad functions off an external 12V power supply and a
Roboguard receiver.
The keypad can also be used to monitor other devices via a 4 zone
Roboguard Universal Transmitter (electric fence, burglar alarm, and
conventional wired sensor).
To Next Page
Loading...