6
1.4 Robomow Safety Features
1.
Child Lock
The Child Lock prevents unintended operation of Robomow
®
by an accidental press of one of the buttons. Only
pressing two buttons in the right order will initiate the operation.
2.
Anti-Theft / Disabling Device
The Anti-Theft / Disabling Device system function will prevent anyone from using or driving the Robomow
®
unless they
have the valid code to enter. You will be prompted to enter a four digit code of your choice to use as your personal
security code.
3.
Lift Sensor
In case the mower is raised from the ground during blade operation, the blade will stop rotating immediately.
4.
Tilt Sensor
In case the mower is tilted up towards a vertical position, the blade will stop immediately.
5.
Obstruction Sensor
Robomow detects interfering obstacles in its way during operation. When the mower collides with an obstacle, the
mower will stop the rotation of the blade immediately, will stop movement in that direction and reverse itself away from
the obstacle.
6.
Emergency Stop Button
Pressing the STOP button at any time during operation will stop the mower and the blade immediately.
7.
Safety Switch
Switching off the Safety Switch will prevent any operation of Robomow
®
. It is required to switch it off before lifting
Robomow
®
and before any maintenance is done.
8.
Sealed Batteries
The batteries that operate Robomow
®
are completely sealed and will not leak any type of uids, regardless of its
position.
9.
Base Station / Perimeter Switch and Perimeter Wire
Robomow
®
cannot operate without a Perimeter Wire installed and activated through the Base Station / Perimeter
Switch. In the event the Perimeter Switch is turned off or otherwise fails to function, Robomow
®
will stop operating.
To Next Page
Loading...
Need help?
General
