Robomow RC312 User Manual

7
EN
Chapter 2 – Know Your Robomow®
2.1 What’s in the Box
1 Robomow® 7
RoboRuler Used for measuring the distance of
the Perimeter Wire from the lawn edge.
2
Wire Pegs Used for securing the wire to the
ground.
8
Base Station Used by Robomow to dock and
charge when it is not mowing.
3
Perimeter Wire Used to create a virtual wall for
your Robomow.
9
Base Station Stakes Used for securing the Base
Station to the ground
4 Operating & Safety Manual 10
Extension Cable 15 meters (50 ft.), (Low voltage
cable)
5
Wire Connectors Used for splicing wires (as
needed)
11
Power Box
The primary purpose of the Power Box is power
supply for charging Robomow.
Used to deactivate (halt) the automatic
operation mode and reactivate it as needed.
6
Plot Connectors Used for connecting the
Perimeter Wire to the Base Station.
12
Power Box Mount Used for xing the Power Box
to a wall (including Screws and dowels).
Operating & Safety Manual
12
11
10
9
8
6
5
7
4
3
1
2

Robomow RC312 Specifications

General

Brand	Robomow
Model	RC312
Category	Lawn Mower
Language	English