Roborock E4 User Manual

Routine Maintenance
Basic Parameters
Robot
350×350×90.5mm
14.4V/5200mAh lithium battery
14.4V/5200mAh lithium battery
58W
Parameters
Approx. 3.0kg
WiFi Smart Connect
14.4VDC
Name
Dimensions
roborock E4model
Battery
Rated Power
Weightt
Wireless Connection
Rated voltage
Charging Time
＜6h
Charging Dock
Parameters
28W
100-240 VAC
50-60Hz
151×130×98mm
Name
Dimensions
CDZ14RR or CDZ15RR
Model
Rated Power
Rated Input
Rated Output
Rated Frequency
Charging Battery
20VDC 1.2A
System Reset
If the robot does not respond when you press a button or
the robot cannot be shut down, reset the system by
pressing and holding the button. The robot will restart
automatically after resetting.
Restore Factory Settings
If the robot is not functioning after a system reset, press
and hold the button and the button together until
the "Restoring factory settings" voice alert sounds. The
robot will then be restored to factory settings. Ignore the
"Reset WiFi" voice alert.
Firmware Update
Update the robot using the Mi Home app. Place the robot
on the Charging Dock and ensure that the battery level is
higher than 20% before updating. The Power Indicator will
flash white quickly during a firmware update.
20

Roborock E4 Specifications

General

Suction Power	2000 Pa
Battery Capacity	5200 mAh
Run Time	Up to 200 minutes
Dustbin Capacity	0.64 L
Mopping Function	Yes
Water Tank Capacity	180 ml
Noise Level	65 dB
Connectivity	Wi-Fi
App Control	Yes
Multi-floor Mapping	No
Virtual Walls	No
Auto Recharge	Yes
Scheduling	Yes
Control	App
Filter Type	High-efficiency filter
Climbing Ability	20 mm
Voice Control	Yes